C.6 - MANUAL programming of the UP (“0”) and DOWN (“1”) limit switches
MONO
UP
STOP
DOWN
NOTES AND WARNINGS
• This procedure is obligatory only for roller shutters without a mechanical stop at the Up position.
•
This procedure can be used if the limit switches have been programmed using the semiautomatic procedure (C.8)”.
• After the limit positions have been programmed, the roller shutter can be controlled by simply pressing the appropriate buttons on the control unit. The roller shutter
will move between the positions set with procedures C.6.1 and C.6.2.
• If the limit switches have not been programmed yet, the roller shutter’s direction of movement might not match the pressed button.
• When performing the procedure, at any time you can cancel it by keeping the
■
and
▼
keys pressed simultaneously for 4 seconds. Otherwise, do not press any key
and wait 60 seconds for the motor to perform 6 movements. • After the adjustments, the
▲
key will command the Raising motion and the key
▼
key will command
the Lowering motion. The roller shutter will move within the limits defined by the two limit switch heights.
C.6.1 - To program the UP limit switch (“0”)
1
2
3
5
sec.
2
5
sec.
4
Hold down the
button and
count 2 movements;
release the button.
Hold down the but-
ton and
count 4 move-
ments;
release the button.
3
4
5
5
sec.
2
Command
an UP
movement
(
)
↕
“
0
”
( )
Hold down the
button and
count 2 movements;
release the button.
Hold down the button
▲
(or
▼
) and wait
...
... release the button as soon as the roller shutter
reaches
position “0”
(
UP
limit switch).
5
6
end
Regolare con
precisione la
quota del fine-
corsa “0”
“
0
”
5
sec.
3
Press the buttons until you reach the desired position.
Hold down the
button and
count 3 movements;
release the button.
C.6.2 - To program the DOWN limit switch (“1”)
1
2
3
5
sec.
2
5
sec.
4
Hold down the
button and
count 2 movements;
release the button.
Hold down the but-
ton and
count 4 move-
ments;
release the button.
3
4
5
5
sec.
2
Command
an DOWN
movement
(
)
“
1
”
↕
( )
Hold down the
button and
count 2 movements;
release the button.
Hold down the button
▲
(or
▼
) and wait
...
... release the button as soon as the roller shutter
reaches
position “1”
(
DOWN
limit switch).
5
6
end
Finely adjust-
ing the posi-
tion of limit
switch “1”
“
1
”
5
sec.
3
Press the buttons until you reach the desired position.
Hold down the
button and
count 3 movements;
release the button.
C
31
– English
