NF HVA4321, Инструкция по эксплуатации

Страница: 26 / 152

2.2 Installation
HVA4321
2-2
！
2.2 Installation
Before installation
This product has a positive air conditioning system with back intake and side exhaust
fans to cool the inner parts. To allow ventilation of air, install this product with
the side and the back by 30 cm or more apart from walls.
The range of ambient temperature and humidity for this product is as follows:
Performance assurance :Temperature 5 ℃ to 35 ℃ Humidity 45% to 85% (no condensation)
Operation assurance : Temperature 0
℃
to 40
℃
Humidity 10% to 85% (no condensation)
Storage condition : Temperature -10
℃
to 50
℃
Humidity 10% to 80% (no condensation)
Installation environment
Do not install or use the product in the following environments:
Place where there is much corrosive gas, moisture, dirt, dust or conductive particles.
Failure such corrosion or deteriorated insulation may occur.
Place where there is flammable gas.
Explosion may occur.
Place where an object may fall
Failure may occur.
Outdoor or place where the product is exposed to direct sunlight, or place near fire or heat
Performance may not be satisfied or failure may occur.
Place near electromagnetic field source, high voltage device, power line, radio transmitter, cell
phone, etc.
Unintended high voltage output may be given or noise may enter.
Place where frequent vibration occurs.
Malfunction or failure may occur.
Installation
Make sure that four legs at the bottom are on a flat place such as a desk.
Never place the unit vertically with the back facing down, horizontally with the side facing down or
up side down with the top facing down.
Do not put an object on the unit.
Do not use a radio transmitter or a cell phone around this unit. Unintended high
voltage output may be given due to radio.
WARNING