NF DF 1906, Инструкция по эксплуатации

Страница: 41 / 96

3.5. Basic Operations
DF1906
3-19
The burst/trigger/gate oscillation stops in the set phase when the oscillation is stopped.
Set Phase

"
4.2.4 Set Phase
"
The oscillation wave number (mark wave number) can be set for burst/trigger oscillation.
Set Oscillation Wave Number

" 4.2.1 Set Mark Wave Number "
The stop wave number (space wave number) can be set for burst oscillation.
Set Stop Wave Number

" 4.2.2 Set Space Wave Number "
The
SYNC OUT
function can be selected for burst/tr igger/gate oscillation.
Select
SYNC OUT
Function

"
4.2.3 Select SYNC OUT Function
"
The effective polar ity for a signal that is input to the TRIG IN connector can be selected for trigger/gate
oscillation.
Select
TRIG IN
Polar ity

"
4.2.5 Select TRIG IN Effective Polarity
(Trigger Oscillation)
",
" 4.2.6 Select TRIG IN Effective Polarity
(Gate Oscillation) "
3.5.8 Select Output On/Off
To switch the output between on and off, press output on/off key [
OUTPUT
].
This key performs toggle oper ation. Press the key to toggle between on and off.
The current state " ON " or " OFF " is displayed on the r ight end of the second line of the display panel.
When "
ON
" is displayed, a signal is output from
F UNCT ION OUT
and
SYNC OUT
connectors.
When "
OFF
" is displayed, no s ignal is output. At this point, the s ignal line of the BNC connector for
FUNCT ION OUT is held open by a mechanical relay. SYNC OUT connector is held in high
impedance state by a logic IC.
Ｆ ５００．０００００００ｋＨｚ Ａ ８．０００Ｖｐ－ｐ Ｏ －１．０００Ｖ
＜ＣＯＮＴ＞ Ｄｕｔｙ ５０．０％ ／ＯＰＥＮ ＯＦＦ
Output ON/OFF display