NF DF 1906, Инструкция по эксплуатации

Страница: 25 / 96

Front Panel
DF1906 3-3
Figure 3-1 Front Panel
Set the frequency
" 3.5.4 Set Frequency "
Set the amplitude and DC offset
" 3.5.5 Set Amplitude and DC Offset "
Select the waveform
" 3.5.6 Select Waveform "
"
4.1 Symmetry and Duty Ratio
"
Switch the output between on
and off
"
3.5.8 Select Output On/Off
"
Manual tr igger in the tr igger/gate osc illation mode "
3.5.7 Select Oscillation Mode
"
Also used to set the numbers on the left and r ight of the cursor to zero when setting a numer ic value
" 3.5.2 Set Numeric Value "
Also used to c lear the setting memory " 4.3.1 Setting Memory "
Select the oscillation mode
"
3.5.7 Select Oscillation Mode
"
"
4.2 Oscillation Mode-related
Settings "
Adjust the contrast of the
display panel
"
3.5.1 Display
"
Move the cursor left and r ight
when setting a numer ic value
Also used to set the numbers
on the left and right of the
cursor to zero
"
3.5.2 Set Numeric Value
"
Set less frequently changed
parameters; for example, selecting
the setting memory, and displaying
the serial number
" 4.3 Special Menu "
Remote control from a PC or
other device via USB
" 5. USB Interface "
Increase/decrease the number
under the cursor when setting
a numer ic value and select a
setting option from the
selection box.
" 3.5.2 Set Numeric Value "
Main output terminal to output
the waveform
" 3.3.1 Output Connector "
"
3.4 I/O Connection
"
Output a logic signal synchronized
with the waveform or
burst/trigger/Gate oscillation
"
3.3 Output Connector
"
" 3.4 I/O Connection "
Provide a tr igger signal from an external
source in the tr igger/gate oscillation mode
" 3.5.7 Select Oscillation Mode "
"
3.3.2 Input Connector
"
Display panel for displaying/s etting the frequency, amplitude, DC
offset, waveform, oscillation mode, output on/off,
and other parameters "
3.5.1 Display
"