Newton T-DAR T1010MT, Инструкция по установке и эксплуатации

Страница: 49 / 112

42
Door Position Switches for Large Mantraps
Follow the above procedure when wiring a Large Mantrap. When multiple doors are
used on the public and/or secure sides of the mantrap, connect all public doors in
series to the public door contact input and connect all secure doors in series with to
the secure door contact. These will signal two difference inputs on the T-DAR control
unit: public door contact (input 4), and secure door contact (input 6).
Access Valid Connections (external relay)
The valid access grant switch should be electrically isolated from the access control
system to allow for proper operation. This will typically require the installation of a
double pole/double throw relay that provides outputs to the access control system as
well as the T-DAR system.
Public and Secure Valid Access Connections