Newton T-DAR T1010MT Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 112

Newton T-DAR T1010MT Скачать руководство пользователя страница 58

51

Installing Master Slave Control Box Software

T-DAR control boxes come preloaded with software and these steps should be
skipped unless performing software updates to one or more of the control boxes.
Installing control box and user interface software for a master/slave system is
different than setting up a single T-DAR control unit. Ensure that the master and all
slaves are connected to a dedicated Ethernet hub.

1. Unplug the Ethernet cable of the master control box or switch this unit off.
2. If there are multiple slave units, choose a slave unit to update. Multiple slave

units may be updated in any order.

3. Insert the T-DAR (control unit) Software CD-ROM into the host PC for the

corresponding slave.

4. Browse to the CD-ROM drive directory and open the folder containing the

control box software that will be loaded.

5. Execute update.exe. When prompted, enter the IP address of the control box.

The IP address is found on the door of the specific control unit.

6. Follow the on-screen instructions.

7. Repeat process 1-6 for any remaining slave control units.

8. Plug in the Ethernet cable of the master control box and/or switch this unit on.

9. Allow the master unit to boot (approximately three minutes).

10. Browse to the CD-ROM drive directory and open the folder containing the

master control box software.

11. Execute update.exe. When prompted enter the IP address of the master

control box. The IP address is found on the door of the control unit.

12. Follow the on-screen instructions.

«
...
56
57
58
59
60
...
»

Содержание T-DAR T1010MT

















































































































Отзывы:

Нет отзывов