Newton T-DAR T1010MT, Инструкция по установке и эксплуатации, Страница: 80 / 112

73
Outputs
There are six relays on a CB-210 for connecting signals from the T-DAR. The first
relay is for the secure door lock,
Relay 1A and Relay 1B . The second relay is for the
public door lock, Relay 2A and Relay 2B . Relays four through six are for the tailgate
alarm and forced door alarm. Activating the relay is caused by enabling the selected
relay number to make contact when an alarm event is present.
For example selecting
Forced door alarm sets outputs check box 4, enables
Relay 4 to close when either the public or secure door is forced open. Likewise,
when Multiple people public entry check box 5 is checked, Relay 5 will close
when tailgating occurs.
Setting triggering events for both doors independently is not possible. Otherwise,
any combination of relays and triggering events may be selected. There is no
specification as to how the relays are to be implemented. Regardless of whatever
the control situation dictates there are three ways to close any of the relays.
Change Administrator Password
Use the same process as changing Installer Password. If the administrator
password becomes lost contact the T-DAR system installer or Newton Security, Inc.
Change Installer Password
Figure 29 - Installer Password