NewTek 3Play 3P1, Руководство пользователя

Страница: 103 / 206

Page | 89

The first digit for GO TO operations is treated as the tab number (superfluous leading zeros are
ignored). This means that if you have 10 or less CLIP LIST tabs, entering a single digit and pressing
GO TO jumps to the corresponding CLIP LIST tab.

If SHIFT is pressed with GO TO, a ‘go to timecode’ operation is performed.
The SEARCH button performs a search of all CLIP LIST tabs for entries that match the criteria entered, and
places the matching events in the Search Results tab.
8.15 THE NUMBER PAD
Not surprisingly, the number pad allows you to type literal numbers into the dataview window, which may
be added to clip Memo fields, used for searching, etc. Less obvious, perhaps, the number pad is also a
dream come true for working with 3Play’s TAGS system.
For quickly populating Memo fields for your marked events using tags, or locating clips using tags, ID or
timecode values, the number pad will almost certainly become your preferred input mechanism (detailed
discussion of all aspects of this matter can be found in in Chapter 13, TAGS, SEARCH, & More).
Also handy to know, in a Program-Preview workflow (Section 14.2), you can select a specific transition
(from among the nine currently listed in the Transition Palette, Figure 147) by holding down SHIFT on the
Control Surface and pressing a number between 1 and 9 on the number pad.
8.15.1 ESC & ENTER
Pressing the Esc (Escape) button cancels a popup dialog,
or exits from text input without applying changes.
As you’d expect, pushing ENTER confirms or executes the
current operation. When editing Memo cells, pushing
ENTER updates the cell using the current content of the
dataview.
Tip: Hold down SHIFT when pressing ENTER to cause all Memo cells for the current event row to take on
the same value.
Figure 95