Neuralog NeuraJet17, Руководство пользователя

Страница: 70 / 100

NeuraJet17 User Guide
© 2014… Neuralog
60
o
►
Yes
- OK to enter
- The test pattern(s) will be similar to the one shown below.
Alignment and Banding Test Patterns
A test pattern is printed. After reading the pattern, the printer automatically adjusts the
Printhead alignment. If automatic alignment is not sufficient manual alignment routines
are available. Contact Neuralog support if needed.
5.7 Adjusting the Feed Amount (Banding Problems)
If printed images are affected by banding in different colors, that is, the contrast is
uneven sideways across the paper, then the Feed needs to be adjusted.
o
Menu
►►►►►
Adjust Printer
▼
o
Auto Band Adjust
▼
o
Standard Adjust
▼
o
►
Yes
- OK to enter
- The test pattern(s) will be similar to the one shown above.
A test pattern is printed for band adjustment. After reading the pattern, the printer
automatically adjusts the feed amount and returns to online mode. If printed
documents are still affected by uneven contrast or banding in different colors at
regular intervals after this adjustment, additional adjustments can be made. Contact
Neuralog support.
5.8 Adjusting the Length Accuracy
The print length can be adjusted on the NeuraJet17 to insure length accuracy of prints.
The NeuraJet17 can be adjusted to a length accuracy of about 99.8%. Length accuracy
of 99.5% is an industry standard. To adjust the measurement scale and ensure length
accuracy, you will specify the amount of paper stretching or shrinkage when adjusting
the feed amount.