Neuralog NeuraJet17, Руководство пользователя

Страница: 66 / 100

NeuraJet17 User Guide
© 2014… Neuralog
56
•
Do not reattach the protective caps the printhead because the cap may damage
the nozzles.
•
To prevent the nozzles from getting clogged with foreign matter or dried ink,
install the printhead immediately after you remove the protective caps.
•
Also make sure to press down the locking lever of the printhead until you feel a
click.
•
In addition, to prevent clogging of the nozzles with foreign matter and improper
supply of ink, never touch the nozzles or ink port or wipe it with tissue paper or
anything else.
•
Do not touch Electrical contact.
•
Also, never attempt to disassemble/reassemble the printhead or wash it with
water.
5.3.2 When the printer is not used for a long time
•
Keep the printhead installed in the printer even when it is not used for an
extended period of time.
•
If the printhead is left uninstalled, a printing failure may arise from closed nozzles
due to depositing of foreign matter or dried ink when it is reinstalled.
•
Even if the head remains installed, the nozzle may dry out and cause a printing
failure if the ink is drained for transport.
5.3.3 Conductivity of Ink
•
The ink used in this printer is electrically conductive. If ink leaks to into the
mechanical unit, wipe clean with a soft, well-wrung damp cloth. If ink leaks onto
electrical units, wipe them completely using tissue paper. If you cannot remove
ink completely, replace the electrical units with new ones.
•
If electrical units are powered with ink leaked onto them, the units may damage.
•
Never connect the power cord when ink has leaded onto the electrical units.
5.3.4 Precautions against Static Electricity
Certain clothing may generate static electricity, causing an electrical charge to build up
on your body. Such a charge can damage electrical devices or change their electrical
characteristics. In particular, never touch the printhead contacts.
5.4 Changing a Print Ink Cartridge
When an ink tank needs to be changed the printer will automatically alert the user. Ink
can be changed even in the middle of a print. Once the ink has been changed, the print
will continue.
The level of each ink is shown on the printer Display Screen bottom line at left. These
levels shown on the Display Screen correspond to the inks identified by the Color Label
below the Display Screen. Remaining ink is indicated in seven levels.