Neuralog NeuraJet17, Руководство пользователя

Страница: 28 / 100

NeuraJet17 User Guide
© 2014… Neuralog
18
perforation. This ensures that there is no “chad” or “flap” at the beginning of a print.
The cut is always placed after the final print page so that the next print begins on the
proper page. The placement of the cut will be consistent for all prints and cannot be
changed.
2.4 The Paper Stacker
NeuraJet17 comes with a built-in paper stacker. The stacker is made up of a tray to
catch the paper and a diverter flap that guides the paper so it can properly fold. The
tray is pre-installed in the printer and should be opened as part of printer setup. The
diverters can easily be snapped into place.
2.4.1 Opening the Paper Stacker Tray
The paper stacker is pre-installed in your NeuraJet17. You will need to open the tray by
pulling it out with the two attached handles and then unfolding it.
Pull out paper tray from printer. The
tray has stoppers that will keep it from
coming out of the printer.
Open the paper tray by unfolding it. The
tray will unfold to a slight angled position.