Neuralog NeuraJet17, Руководство пользователя

Страница: 18 / 100

NeuraJet17 User Guide
© 2014… Neuralog
8
sure the path from the paper box to the printer is unobstructed. Always make sure the
paper flows straight with respect to the CFA. The paper should not twist as it enters the
CFA. Load the paper directly from behind the printer to ensure that twisting does not
occur.
The paper will exit the front side of the printer into the paper stacker. Be sure to have
adequate table or floor space for the paper. Always make sure the paper exit path out
of the printer is unobstructed.
2.1.2 Unpacking the NeuraJet17 Box
Setup sheets for the NeuraJet17 are provided with your equipment. If you are unable to
locate the setup sheets, they can be downloaded in the PDF format from
www.neuralog.com . We recommend that you save your boxes and packaging material.
The printer must be moved by two or more persons on both sides. Be careful not to
injure yourself by incorrectly handling the printer.
The following components should be in your NeuraJet17 box.
•
Setup sheets
•
Printer
•
Continuous Feed Unit (attached to printer)
•
Paper Stacker (attached to printer)
•
Cleaning sheet
•
Sample paper
•
Power Cord
•
Network or USB Cable
•
Printhead
•
Starter ink tanks
•
Cleaning brush
•
Reference Guides
•
CD ROM with software and documentation
To unpack the printer, take out the printer and accessories from the shipping box and
remove cushioning materials.
•
First remove the cushioning materials at the top of the printer.
•
Next, remove the cushioning materials by raising the left and right sides of the
printer. Insert your hands in the clearance under each side of the printer to do
this.
•
Grasping the carrying handles on the left and right side of the bottom, place the
printer on a level place such as a table.
The Continuous Form Attachment and Paper Stacker are preinstalled on the printer.