Neuralog NeuraJet17, Руководство пользователя

Страница: 25 / 100

NeuraJet17 User Guide
© 2014… Neuralog
15
2. Load paper into printer rollers.
Once the slider is in place, place the
edge of the paper under the four white
rollers in the printer.
The printer will automatically grab the
paper.
The printer will move the paper back
and forth to measure the paper width and
further straighten the paper. When complete,
the green online button will illuminate.
If the paper load was successful, the green Online button will illuminate. If the paper
load was unsuccessful (the paper was loaded crooked), the printer will give a paper jam
error. You will need to reload the paper.
2.3.3 Removing and Reloading the Paper
The printer moves the paper to straighten it. If the paper does not load straight, an error
state will occur. Remove the paper as follows.
• Press the Stop/Eject button for one second, until the printer responds.
• Press the UP arrow to release the rollers.
▲
• Remove the paper from the printer
• Press the DOWN roller to re-engage the rollers.
▼
• Wait until the printer displays the green ONLINE button.
• Follow the paper
loading steps in the previous section.
2.3.4 Troubleshooting Paper Loading
If the paper does not load correctly, it is likely that it is not properly aligned with the
printer, or it may have become wrinkled during the load attempt. If the paper becomes
wrinkled or damaged, remove any wrinkled sheets. Please check the following.