Neuralog NeuraJet17, Руководство пользователя

Страница: 29 / 100

NeuraJet17 User Guide
© 2014… Neuralog
19
2.4.2 The Paper Stacker Diverter
There is a flap along the top exit of the paper stacker that acts as a paper stacker
diverter. This flap moves back and forth as the paper exits the printer and helps the
paper to properly fold. Vertical plastic strips on the back of this flap help the paper to
glide past this bar. Make sure this flap always moves freely in the printer.
2.4.3 Removing and Reinstalling the Paper Stacker
It is unlikely that you will need to remove the paper tray. However if you do need to
remove the tray, then follow these instructions.
•
Turn the printer OFF.
•
Reach into the tray cavity inside the printer before closing the tray. There is a
lever that keeps the tray from sliding out. You will need to depress this lever so
that the tray can slide out of the printer.
•
Once the tray is sliding out, close the tray and completely remove it.
To replace the tray:
•
Make sure the printer is OFF.
•
With the tray closed, slide it into the printer cavity. You will hear it click into
place, once the lever catches.
•
Open the tray (before attaching the diverters).
2.5 Turning the Printer On and Off
The printer may be turned off by holding down the power button for 1 second. Make
sure there are no print jobs in progress. If the Data lamp is flashing, the printer is
receiving a job. Cancel the job or wait until it is finished before turning off the printer.
Turning the printer off during a print could damage the printer.
The printer is turned on by holding down the Power button. Make sure the CFA is
properly attached before turning the printer On, otherwise an error state will occur.
Diverter Flap