Neuralog NeuraJet17, Руководство пользователя

Страница: 17 / 100

NeuraJet17 User Guide
© 2014… Neuralog
7
2 NeuraJet17 Setup and Installation
2.1 Printer Setup
NeuraJet17 setup is simple and should only take a few minutes. Before you begin, you
will need to choose an easily accessible location and decide how the printer will be
integrated into your network. You will need a physical network connection and a
network address for your printer, or you may choose to connect to your printer using
USB. The NeuraJet17 comes with a rolling printer stand. You will need to choose a
location to fit the printer and stand.
2.1.1 Location
Printers should be set up in a cool (office-temperature) environment and on a sturdy
table or stand. The printer weighs about 95 pounds. It is recommended that it be lifted
and moved by at least two people. The printer has handholds which make moving it
easier. Be sure to locate these handholds before attempting to move the printer.
The printer will need power and network/USB connections. Printers consume a
significant amount of power and can significantly contribute to network traffic; make sure
your facility is set up for office printing.
Make sure your printer has adequate space. You will want to access the operator panel
at the FRONT of the printer. The prints will exit the printer at the front. You will load
paper into the BACK of the printer. You will need space to stand behind the printer
when loading paper.
Continuous form paper may be placed on a table next to the CFA or it may be kept in
the box on the floor. The NeuraJet17 has been designed to pull continuous form paper
directly from the box. However, it is important to make sure the paper flow is in no way
restricted by the box lid, placement of the box, or by plastic in the box. Always make