28
My-Netti.com
Model:
Netti Dynamic S
Language:
English
Version:
2021-03
ANKLE HUGGERS
The footboard has holes prepared for ankle huggers
or shoe shells to be mounted as accessories if
required.
Ankle huggers are useful when involuntarily leg
movements slide the feet of the footboard.
Ankle huggers are mounted to the footboard by
threading the fixing belts through the holes in the
footboard fixing them with buckles on the underside
of the footboard.
FOOTBOARD HEIGHT ADJUSTMENT
Loosen the M6 screws holding the leg support
length-profile on the outside with 5 mm Allen-key.
Adjust the footboard to a height from top of front
edge seat-cushion to the footboard equal to the
lower leg length.
Make sure there is enough free space under
the footboard for the wheelchair to pass
minor obstacles. Slightly tilting the seating
unit may help.
CALF SUPPORT HEIGHT AND DEPTH
ADJUSTMENT
• Loosen the two M6 screws holding the calf pad
arm and slide each calf pad up or down to desired
height. They should in addition to supporting the
calf also help prevent the feet sliding backwards
from the footboard.
• Twist the calf pads to an angle giving support for
the leg when the foot support is angled. The calf
pads can swing freely to follow the movements
and adjust to the user’s leg position.
• Adjust the calf-pad depth by losing the M8 screw
sitting inside the calf pad.
•
Position the calf pad backwards or forwards till it
barely touches the user’s calf with his / her feet
resting on the footboard.
•
The feet should stay on the footboard with the
feet on the middle of it.
