55
Model:
Netti Dynamic S
Language:
English
Version:
2021-03
My-Netti.com
11. TROUBLESHOOTING
Symptom
Reason / Action
Reference
in manual
The wheelchair is
going askew
• The main wheel hubs might be incorrectly mounted.
• The front castors may not stand vertical to the ground
or in the same height.
• One of the brakes might be too tight.
• The user is sitting very askew in the chair.
• The user might be stronger on one side than the other.
6.2
6.3
6.14
The wheelchair
is heavy to
manoeuvre
• The main wheel hubs might be incorrectly mounted.
• Clean the front castors and forks for dirt.
• Too much weight over the front castors.
6.2
6.3
The wheelchair is
hard to turn
• Check that the front castors are not fixed too hard.
• Clean the front castors and forks for dirt.
• Check, that the front castors are placed in correct position.
• Too much weight over the front castors, adjust the balance
of the chair.
6.3
6.3
6.3
The main wheels
are difficult to
take off and put
on
• Clean and grease the quick release.
• Adjust hub bushing further out from the frame.
6.2
6.2
The brakes are
not functioning
well
• Adjust the brake.
• Check the distance between wheels and brakes.
6.14
The front castors
wobble and the
chair is shaky
• The front forks are not properly fixed.
• Adjust the front fork angle.
• Too much load over the front castors will provoke wobbling,
adjust the balance of the chair.
• Tighten all screws.
6.3
Please contact your dealer for information about authorized service facilities
that can give support if solution is not reached in this form.
When in need of spare parts, please contact your dealer.
When making changes affecting frame construction, contact dealer /
manufacturer for confirmation ahead of the action.