Netti DYNAMIC S Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 60

Netti DYNAMIC S Скачать руководство пользователя страница 17

17

Model:

Netti Dynamic S

Language:

English

Version:

2021-03

My-Netti.com

ANGLE OF BEARING HOUSE

Correctly adjusted vertical angle of the front fork is

important to achieve proper manoeuvring qualities

of the wheelchair.

Unfix the two bearing house screws on the outside

of the frame enough to adjust the eccentric nut on

the inside.

Angle the bearing house, so that it is 90° relative to

the ground, tighten the screws well.

1 pc Allen-key.

The bearing house cannot

be adjusted in height.

Check the position of the anti-tip.

6.4

FRONT CASTORS

To take of

• Press the quick release button and pull the front

wheel downwards.

To mount

• Lead the quick release axle into the bearing house

and push firmly.

• Pull the fork slightly to ensure that the fork is fully

locked.

The foot-print of the wheelchair can be increased by

interchanging the front castor bearing houses.

Sand and sea water (salt used for gritting in

the winter) can damage the bearings of the

front castors and the main wheels.

Clean the wheelchair thoroughly after

exposure.

«
...
15
16
17
18
19
...
»

Содержание DYNAMIC S





























































Отзывы:

Нет отзывов