16
My-Netti.com
Model:
Netti Dynamic S
Language:
English
Version:
2021-03
6.2
MAIN WHEELS
16” x 1,4” (406 x 36 mm) with drum brake are
installed by default from the factory.
22” main wheels can be ordered.
They will be installed from factory or
authorized personnel.
The 22” wheels have 4 degree camber angle
and drum brakes. The brakes are operated
independent on each side.
22” main wheels allow for higher seating
height.
6.3
FRONT FORK
Front forks come as standard with quick release axles
on top.
The front fork is easily removed by pressing the QR
knob. The knob sits under the silicon hat on top of
the bearing house. Pull the axle downwards out of
the bearing house.
Check the angle of the castor
bearing house. It should be
vertical to the ground to give
good driving performance.
6. ASSEMBLING AND
ADJUSTMENT
For information about adapting the
wheelchair to the user, please see:
My-Netti.com Knowledge center.
Tools needed are described under each chapter.
Accessories described in chapter 5 is a presentation
of options and will be delivered with separate
mounting descriptions.
6.1
UNPACKING
1. Unpack all the parts, and check that
everything is there according to the
packing list.
2. Unfold the chair back and mount the recline
cylinder to the chair back frame.
3.
Mount anti-tippers.
4. Pull up the arm supports to correct height.
5. Place cushions and mount the leg supports.
6.
Mount accessories.
Weight of components
Main wheel:
16” x 1,4”: 1,7 kg each
Front castors:
6”: 0,6 kg each
Leg support:
2,1 kg (with footboard)
Back cushion:
Super Stabil S: 1,0 kg
Netti S Sit cushion:
0,8 kg
Head support A Mini:
0,75 kg
Necessary tools are described under each chapter.
Accessories described in chapter 5 are presentations
of options, and will be delivered with separate
mounting descriptions.
