manualshive.com logo in svg

Netti DYNAMIC S, Руководство пользователя, Страница: 23 / 60

Поделиться
Скачать
Netti DYNAMIC S Скачать руководство пользователя страница 23

23  

  [email protected]

  [email protected]

Model: 

Netti Dynamic S

Language: 

English

 

Version:

 

2021-03

My-Netti.com

Anti-tips height is adjusted as follows:

•   Unfix the 3 screws on the anti-tip pedal. 

•   Pull out or push in the vertical bar. 

•   Fix it in correct height using an Allen-key.

•   Do the same procedure on the opposite side.

  

5 mm Allen-key.

    Check that both anti-tips have the same 

length. The gap between the anti-tip wheels 

and the ground must be max. 30 mm.

   The anti-tip should always be used for  

the safety of the user.

6.12 ANTI-TIP

Netti Dynamic S is always delivered with anti-tips.  

The anti-tips are to be activated in all daily use. 

Always activate the anti-tip whenever the  

wheelchair is left without attendant.  

The anti-tips only need to be folded away when 

obstacles are to be crossed.

Activate (from fold away position):

•  Step on the parking brake pedal and lock.

•  Pull the anti-tip out / rearwards. 

•  Turn it down 180°.

•  It locks into position with spring tension. 

Fold away:

•  Step on the parking brake pedal and lock. 

•  Pull the anti-tip out / rearwards.

•   Turn it up 180°. It locks into position with  

spring tension.

    The anti-tips are delivered adjusted 

according to ordered main wheel size in 

standard position.

Содержание DYNAMIC S





























































Отзывы:

Нет отзывов