
52
My-Netti.com
Model:
Netti Dynamic S
Language:
English
Version:
2021-03
9.4
TRAVELLING ON
PUBLIC TRANSPORT
The wheelchair should be put in a special area for
wheelchairs. The wheelchair should face opposite
the direction of travel. The back of the wheelchair
must be located against a fixed object such as a
row of seats or a partition. Make sure the user can
easily reach any hand rails or handles. Use belts and
harnesses in the chair to hold the user. Use safety
belts if available to secure the user in the vehicle.
Please be aware that wider wheelchairs have
wider turning radius and reduced
manoeuvrability in vehicles. Smaller
wheelchairs generally provide greater ease
of vehicle access and manoeuvrability to a
forward facing position.
9.3
TRANSPORT IN AIRPLANE
Netti Dynamic S wheelchair may be transported in
airplane without any restrictions.
Netti Dynamic S wheelchair is equipped with
2 gas springs. These are however not classified as
dangerous goods.
Contrary to general dangerous goods instruction
UN3164, the IATA-DGR (special regulation A114)
rules that the goods that contain gas and are
determined to function as shock absorbers
(including energy-absorbing devices or pneumatic
springs) are NOT subject to the transport
instructions i.e. they are indemnified from the
following requirements:
a)
Each article has a gas volume which does not
exceed 1,6 l and a charge pressure not exceeding
250 bar, where the product of the capacity
expressed in liters and charge pressure expressed
in bars doesn’t not exceed 80.
b)
Each article has a minimum burst pressure of
4 times the charge pressure at +20 degree
Celsius for products not exceeding 0,5 l
gas space capacity.
c)
Each article is made of material that will not
fragment.
d)
Each article was manufactured in accordance
to quality standard which is approved by the
responsible national authority.
e)
It is proven and shown that the article relives its
pressure by means of a fire degradable seal or
other pressure relief device such that the article
will not fragment and the article does not rocket.