Copyright © NetPing east Co., Ltd E-mail:
Phone:+886-2-23121582
1.
2.
3.
[ENG] 7.4. [DKSF 48.4 IU] How to Manage an Input-Output Line in the Output Mode?
To manage an IO line, there is a need to go to the page «
» of a device web interface:
DISCRETE IO
Set an IO line to the
operation mode;
«output»
Check a checkbox «
» at «
» or «
»;
Output Logic Level
Logic 1
Logic 0
Save parameters by clicking the button «
»
Apply Changes
Input Logic Level – is a field displaying a current logic level of an IO line. It is updated automatically when changing a logic level of a line with no need
to reload an entire page;
Output Logic Level – is a parameter of a logic level of a line, which works as an «
». A
status
means having voltage at an output line (a
output
logic
«1»
scheme with an open collector). A logic
means having 0V at an IO line.
status «0»
: logic « »;
On default
0
Single Pulse Generation – when clicking the button «
», an IO line, which works as an output, will be inverted for a specified period of time. A pulse
pulse
duration is set in the field «
. If a line is set to «
», then the button for issuing a pulse will not be active.
Pulse Duration (100-25500ms, step 100ms)»
output
