manualshive.com logo in svg

NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point, Справочное руководство

Поделиться
Скачать
NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point Скачать руководство пользователя страница 71

Advanced Configuration 

71

 ProSAFE Dual Band Wireless N Access Point WNDAP350

Collision Detection) mechanism or the CSMA/CA mechanism for packet 
transmission. With the CSMA/CD transmission mechanism, the transmitting station 
sends out the actual packet as soon as it has waited for the silence period. With the 
CSMA/CA transmission mechanism, the transmitting station sends out an RTS 
packet to the receiving station, and waits for the receiving station to send back a CTS 
(Clear to Send) packet before sending the actual packet data. The default is 2347.

•

Fragmentation Length (256 - 2346)

. This is the maximum packet size used for 

fragmentation. Packets larger than the size programmed in this field will be 
fragmented. The Fragmentation threshold value must be larger than the RTS 
threshold value. The default is 2346.

•

Beacon Interval (100 - 1000)

. The Beacon Interval. Specifies the interval time 

between 100ms and 1000ms for each beacon transmission, which allows the access 
point to synchronize the wireless network. The default is 100.

•

Aggregation Length (1024-65535) (11ng)

. The aggregation length defines the size 

of aggregated packets. Larger aggregation lengths may sometimes lead to better 
network performance. The default is 65535.

•

A-MPDU (11ng)

. Aggregated MAC Protocol Data Unit. Aggregates several MAC 

frames into a single large frame to achieve higher throughput. The default is enabled.

•

RIFS Transmission (11ng)

. Reduced Interframe Space. RIFS transmissions are 

shorter than other interframe spaces, and if enabled allow transmission of successive 
frames at different transmit powers. The default is disabled.

•

DTIM Interval

. The Delivery Traffic Indication Message. Specifies the data beacon 

rate between 1 and 255. The default is 3. 

•

Preamble Type (11b/bg only)

.

: 

A long transmit preamble may provide a more 

reliable connection or a slightly longer range. A short transmit preamble gives better 
performance. The Auto settings automatically handles both long and short 
preambles. The default is Auto.

•

Antenna

.

 

Enable the internal or external antenna. The internal antenna is enabled by 

default.

•

802.11d

. Enable this option to include support for additional regulatory domains that 

are not in the current standard.

•

Client Isolatio

n. This option, when enabled, blocks communication between wireless 

clients that are associated to different VAPs. The default is Disable.

•

Max Wireless Clients

. The number of wireless clients that can associate with the AP 

at one time. The default is 63.

5. 

Click 

Apply 

to enable the Wireless Settings.

Configuring 802.11a/na Advanced Wireless Settings

To configure advanced wireless settings:

1. 

Under the 

Configuration

 tab, select 

Wireless

.

2. 

From the sidebar, select 

Advanced

, and then select 

Wireless Settings

.

Содержание WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды