Basic Installation and Configuration
45
ProSAFE Dual Band Wireless N Access Point WNDAP350
To configure WPA and WPA2 with RADIUS:
1.
Under the
Configuration
tab, select
Security
on the main menu, select
Advanced
from
the left panel, and then select
RADIUS Server Settings
. The RADIUS Server Settings
screen displays.
2.
Enter the RADIUS settings as shown in
Configuring the RADIUS Server Settings
on
page 38.
3.
Click
Apply
to save your RADIUS settings
4.
Under the
Configuration
tab, select
Security
from the main menu, and then select either
Security Profile Settings for 802.11b/bg/ng or 802.11a/na. The screen for the Profile Settings
you selected displays. When the Security Profile screen displays, check the check box of the
Security Profile you want to modify and click
Edit
.
5.
From the
Network Authentication
drop-down menu, select
WPA & WPA2 with RADIUS
from the list. By default,
Data Encryption
will be set to
TKIP+AES
.
6.
Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
7.
Click
Apply
to save your settings.
Configuring WPA-PSK
Not all wireless adapters support WPA. The wireless adapter hardware and driver must also
support WPA. Consult the product document for your wireless adapter and WPA client
software for instructions on configuring WPA settings.
Figure 23. Configure WPA-PSK
To configure WPA-PSK:
1.
From the
Network Authentication
drop-down menu, select
WPA-PSK
. By default,
Data
Encryption
will be set to
TKIP
.
