manualshive.com logo in svg

NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point, Справочное руководство

Поделиться
Скачать
NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point Скачать руководство пользователя страница 46

Basic Installation and Configuration 

46

ProSAFE Dual Band Wireless N Access Point WNDAP350 

2. 

Enter the preshared key passphrase (Network Key).

3. 

Wireless Client Security Separation is disabled by default. If enabled, associated wireless 
clients will not be able to communicate with each other. (This feature is intended for hotspots 
and other public access situations.

4. 

Click 

Apply

 to save your settings.

Configuring WPA2-PSK

Not all wireless adapters support WPA2. Furthermore, client software is required on the 
client. Make sure your client card supports WPA2. Consult the product document for your 
wireless adapter and WPA2 client software for instructions on configuring WPA2 settings.

Figure 24. Configure WPA2-PSK

To configure WPA2-PSK:

1. 

From the 

Network Authentication 

drop-down menu, select 

WPA2-PSK

 from the list. By 

default, 

Data Encryption 

will be set to 

AES

.

2. 

Enter the preshared key passphrase (Network Key).

3. 

Wireless Client Security Separation is disabled by default. If enabled, associated wireless 
clients will not be able to communicate with each other. (This feature is intended for hotspots 
and other public access situations.

4. 

Click 

Apply

 to save your settings.

Configuring WPA-PSK and WPA2-PSK

Not all wireless adapters support WPA and WPA2. Client software is required on the client. 
Make sure your client card supports WPA2. The wireless adapter hardware and driver must 
also support WPA2.

Содержание WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды