manualshive.com logo in svg

NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point, Справочное руководство

Поделиться
Скачать
NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point Скачать руководство пользователя страница 55

Management 

55

 ProSAFE Dual Band Wireless N Access Point WNDAP350

Restoring Saved Settings

To restore your settings from a saved configuration file:

1. 

Under the 

Maintenance

 tab on the main menu, select 

Upgrade

, then select 

Restore 

Settings

 from the sidebar to back up your current settings. The following screen 

displays: 

\

Figure 32.  Restore Configuration settings from file

2. 

Enter the full path to the file on your computer or click the 

Browse

 button to locate the file. 

3. 

When you have located the file, click 

Restore

 to upload the file. After completing the upload, 

the WNDAP350 will reboot automatically.

Restoring the WNDAP350 to the Factory Default Settings

It is sometimes desirable to restore the wireless access point to the factory default settings. 
This can be done by using the Restore Defaults option, which restores all factory settings.

To restore the factory default settings:

1. 

Under the 

Maintenance

 tab on the main menu, select 

Reset

, and then select 

Restore 

Defaults

 from the sidebar. The Restore Defaults screen displays, as shown in 

Figure 33, Restore to factory defaults

 below.

Содержание WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды