manualshive.com logo in svg

NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point, Справочное руководство

Поделиться
Скачать
NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point Скачать руководство пользователя страница 30

Basic Installation and Configuration 

30

ProSAFE Dual Band Wireless N Access Point WNDAP350 

-

Data Rates for Channel Width=20MHz and Guard Interval=long (800ms)

. 

Best, 6.5 Mbps, 13 Mbps, 19.5 Mbps, 26 Mbps, 39 Mbps, 52 Mbps, 58.5 Mbps, 
65 Mbps, 13 Mbps, 26 Mbps, 39 Mbps, 52 Mbps, 78 Mbps, 104 Mbps, 117 Mbps, 
130 Mbps

-

Data Rates for Channel Width=40MHz and Guard Interval=short

. Best, 

15 Mbps, 30 Mbps, 45 Mbps, 60 Mbps, 90 Mbps, 120 Mbps, 135 Mbps, 
150 Mbps, 30 Mbps, 60 Mbps, 90 Mbps, 120 Mbps, 180 Mbps, 240 Mbps, 
270 Mbps, 300 Mbps

-

Data Rates for Channel Width=40MHz and Guard Interval=long

. Best, 

13.5 Mbps, 27 Mbps, 40.5 Mbps, 54 Mbps, 81 Mbps, 108Mbps, 121.5 Mbps, 
135 Mbps, 27 Mbps, 54 Mbps, 81 Mbps, 108Mbps, 162 Mbps, 216 Mbps, 
243 Mbps, 270 Mbps

•

Channel Width

. From the pull-down menu, select the desired channel width. To 

maximize performance, select high throughput channel width. The default is Dynamic 
20/40 MHz.

•

Guard Interval

. From the pull-down menu, select the desired guard interval. The 

guard interval protects from interference from other transmissions. The default is 

Auto.

The data rates for different Channel Width and Guard Interval combinations are given 
above:

•

Output Power

. From the pull-down menu, select the transmit power of the access 

point. The options are Full, Half, Quarter, Eighth, and Minimum. Decrease the 
transmit power if two or more APs are close together and use the same channel 
frequency. The default is Full. (The transmit power may vary depending on the local 
regulatory regulations. 

3. 

Click 

Apply 

to save your 802.11a/n wireless settings.

Configuring Basic QoS Settings

Wi-Fi Multimedia Support (WMM). Wireless Multimedia (WMM) is a subset of the 802.11e 
standard. WMM allows wireless traffic to have a range of priorities, depending on the type of 
data.

Time-dependent information, such as video or audio, has a higher priority than normal traffic. 
For WMM to function correctly, Wireless clients must also support WMM.

To configure basic wireless QoS settings for 11b/bg/ng and 11a/na:

1. 

Under the 

Configuration

 tab, select 

Wireless

 from the main menu, select 

Basic

, and 

then select 

QoS Settings

 from the left panel. The QoS Settings screen displays, as 

shown in 

Figure 14, Basic QoS settings screen

.

Содержание WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды