manualshive.com logo in svg

NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point, Справочное руководство

Поделиться
Скачать
NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point Скачать руководство пользователя страница 68

Advanced Configuration 

68

ProSAFE Dual Band Wireless N Access Point WNDAP350 

IP Settings for Wireless Clients

You can turn the WNDAP350 into a DHCP Server for wireless clients for both DHCP-enabled 
wireless clients. The default advanced IP wireless settings usually work well. This feature is 
intended for use by a systems administrator. By default, this feature is not enabled.

To use this wireless access point as a DHCP server:

1. 

From the main menu under 

Configuration

, select 

IP

, and then select 

DHCP Server 

Settings

. The DHCP Server Settings screen displays (see 

Figure 44, DHCP server 

settings

).

2. 

DHCP Server is disabled by default. Select the 

Enable

 radio button to enable this wireless 

access point as a DHCP server.

.

Figure 44.  DHCP server settings

3. 

Configure the following TCP/IP configurations for using the WNDAP350 as a DHCP Server 
for wireless clients. 

•

DHCP Server

. By default, the Dynamic Host Configuration Protocol (DHCP) server 

on the AP is disabled. If you enable it, all the wireless clients associated with the AP 
will get their IP addresses, subnet mask and default gateway settings automatically 
from the AP.

•

DHCP Server VLAN ID

. All the stations that are part of the configured VLAN ID will 

get their IP addresses only from the AP.

•

Starting IP Address

. Enter the starting IP address that can be assigned from the 

DHCP server on this Access Point. 

•

Ending IP Address

. Enter the Ending IP address that can be assigned from the 

DHCP server on this Access Point 

•

Subnet Mask

. The Access Point will assign the specified subnet mask to the 

connected wireless stations. 

Содержание WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды