Management
64
ProSAFE Dual Band Wireless N Access Point WNDAP350
Figure 40. Enable Rogue AP detection
2.
Check the
Turn Rogue AP Detection On
radio box to enable rogue AP detection and click
Apply.
If you enable Rogue AP Detection, the AP continuously scans the wireless network and
collects information about all APs heard on its channel.
3.
You can Import AP List from a File. See
Importing Rogue AP List from a File
on page 64 for
more information.
4.
Under the Unknown AP List, click
Refresh
to discover the APs.
5.
Click
Move
to add any AP to the Known AP List.
6.
Click
Delete
to remove an AP from the Known AP List.
7.
Click
Apply
to save your change.
Importing Rogue AP List from a File
To replace the existing AP list:
1.
Create a text file that contains the MAC address of each known AP, separated by a
space. The following example shows a list of six known APs that an administrator might
upload to the AP:
00:0c:41:d7:ee:a5
00:0f:b5:92:cd:49
00:12:17:70:85:3d
00:14:bf:ae:b1:e4
00:40:f4:f8:47:03
00:0c:41:d7:ee:b4
2.
Select
Replace
to replace the existing list of known APs, or select
Merge
to add the new
MAC addresses to the existing list.
