Management Commands
679
ProSafe Managed Switch
show radius servers
Use this command to display the summary and details of RADIUS authenticating servers
configured for the RADIUS client.
Format
show radius servers [ { <ipaddr | dnsname> | name [<servername> ] } ]
Mode
The following shows example CLI display output for the command.
(Switch) #show radius servers
Cur Host Address Server Name Port Type
rent
---- ------------------------ --------------------------------- ----- ----------
* 192.168.37.200 Network1_RADIUS_Server 1813 Primary
Privileged EXEC
Field
Description
ipaddr
The IP address of the authenticating server.
dnsname
The DNS name of the authenticating server.
servername
The alias name to identify the server.
Current
The ‘*’ symbol preceeding the server host address specifies that the server is
currently active.
Host Address
The IP address of the host.
Server Name
The name of the authenticating server.
Port
The port used for communication with the authenticating server.
Type
Specifies whether this server is a primary or secondary type.
Current Host Address
The IP address of the currently active authenticating server.
Secret Configured
Yes or No Boolean value that indicates whether this server is configured with a
secret.
Number of
Retransmits
The configured value of the maximum number of times a request packet is
retransmitted.
Message
Authenticator
A global parameter to indicate whether the Message Authenticator attribute is
enabled or disabled.
Time Duration
The configured timeout value, in seconds, for request retransmissions.
RADIUS Accounting
Mode
A global parameter to indicate whether the accounting mode for all the servers is
enabled or not.
RADIUS Attribute 4
Mode
A global parameter to indicate whether the NAS-IP-Address attribute has been
enabled to use in RADIUS requests.
RADIUS Attribute 4
Value
A global parameter that specifies the IP address to be used in NAS-IP-Address
attribute used in RADIUS requests.
