Utility Commands
531
ProSafe Managed Switch
logging host remove
This command disables logging to host. See
show logging hosts
on page
532 for a list of host
indexes.
Format
logging host remove <hostindex>
Mode
logging syslog
This command enables syslog logging. The
<portid>
parameter is an integer with a range
of 1-65535.
Default
Format
logging syslog [port <portid>]
Mode
no logging syslog
This command disables syslog logging.
Format
no logging syslog
Mode
logging syslog source-interface
This command configures the syslog source-interface.
Format
logging syslog source-interface {<u/s/p> | {loopback <
loopback-id
>}
| {tunnel <
tunnel-id
>}}
Mode
show logging
This command displays logging configuration information.
Format
show logging
Mode
Global Config
disabled
Global Config
Global Config
Global Config
Privileged EXEC
Term
Definition
Logging Client
Local Port
Port on the collector/relay to which syslog messages are sent.
CLI Command
Logging
Shows whether CLI Command logging is enabled.
Console
Logging
Shows whether console logging is enabled.
