Management Commands
639
ProSafe Managed Switch
username name nopassword
Use this command to remove an existing user’s password (NULL password).
Format
username
name
nopassword [
Level Level
]
Mode
username <username> unlock
Use this command to unlock a user’s account. Only a user with read/write access can
re-activate a locked user account.
Format
username
<username>
unlock
Mode
username snmpv3 accessmode
Use this command to specify the snmpv3 access privileges for the specified login user. The
valid accessmode values are
readonly
or
readwrite
. The
<username>
is the login user
name for which the specified access mode applies. The default is
readwrite
for the
“admin” user and
readonly
for all other users. You must enter the
<username>
in the same
case you used when you added the user. To see the case of the
<username>
, enter the
show users
command.
Defaults
• admin - readwrite
• other - readonly
Format
username snmpv3 accessmode
<username> {readonly | readwrite}
Mode
no username snmpv3 accessmode
Use this command to set the snmpv3 access privileges for the specified user as
readwrite
for the “admin” user and
readonly
for all other users. The
<username>
value is the user
name for which the specified access mode will apply.
Format
no username snmpv3 accessmode
<username>
Mode
Global Config
Parameter
Description
name
The name of the user. Range: 1-32 characters.
password
The authentication password for the user. Range 8-64 characters.
level
The user level. Level 0 can be assigned by a level 15 user to another user to suspend
that user's access. Range 0-15.
Global Config
Global Config
Global Config
