Configuring Networks
Find out how to check your activation status and data usage, and set up your device to connect
to the Virgin Mobile network.
Viewing Network Activation Information
You can check whether network access is activated.
1. Log in to the home page. (See
Logging In as an Administrator
.)
2. Click
About
in the top right corner of the page.
3. Check the
Activation Date
in the WWAN Info section. This is the date that the hotspot
was activated on the Virgin Mobile network.
Viewing Data Usage
You can view an estimate of your data usage on your device’s home screen, and on the Mingle
Manager’s home page.
Note:
The data usage shown is an estimate only and is not accurate for billing purposes.
Note:
The session data counter resets automatically each time your device is powered off and
on, and when the mobile broadband network connection disconnects and reconnects (for
example, when going through a tunnel). The plan data counter does not reset automatically, but
you can click
Reset
to reset it manually.
On the LCD screen
The data usage shown on the home screen is the total used since the counter was last
manually reset.
In the Mingle Manager (http://minglehotspot)
The data usage shown on the home page is the total used since the counter was last manually
reset.
To see detailed data usage, log in to the home page. (See
Logging In as an Administrator
.)
The Data Usage
Session
section shows:
●
Amount of data used in the current session.
●
The length of time the connection has been active.
The Data Usage
Billing Cycle
section shows:
Configuring Networks
82
