Your Network Connection
Find out how to launch, share, and end your network connection.
Launching Your Network Connection
After your device powers on and boots up, a connection to the best available network is
launched automatically.
Your device will remain connected at all times, unless:
●
You are out of signal range or the signal is blocked (in a tunnel, etc.).
Note:
Even though your device is connected, you are only billed when data is sent or received.
See
If the Connection is “Always On,” Am I Always Being Billed?
.
See also:
●
Internet Connection Information
●
Mobile Broadband Information and Settings
●
Signal Information
Setting up a Guest Wi-Fi Network
Your NETGEAR Mingle Mobile Hotspot lets you create a separate Guest Wi-Fi network that you
can share with temporary users.
Devices on the Guest Wi-Fi network:
●
Cannot access devices that are on the Main Wi-Fi network (such as printers or other
computers)
●
Cannot use the Mingle Manager to change any device settings
Turning the Guest Wi-Fi Network On
You can turn on the Guest Wi-Fi network from your device’s Guest Wi-Fi screen, or from the
Mingle Manager’s Wi-Fi page.
On the LCD screen
1. From the homescreen, click the power button once to display the next screen. Repeat
until you reach the Guest Wi-Fi screen.
2. Click the power button twice to turn on Guest Wi-Fi.
Your Network Connection
22
