Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
2-2
Overview
v1.0, February 2007
7200 Series Managed Switch software includes a set of comprehensive management
functions for managing both the switch and the network. You can manage the 7200 Series
Managed Switch software by using one of the following three methods:
•
Web-based
•
VT100 interface
•
Simple Network Management Protocol (SNMP)
Each of the management methods enables you to configure, manage, and control the
software locally or remotely using in-band or out-of-band mechanisms. Management is
standards-based, with configuration parameters and a private MIB providing control for
functions not completely specified in the MIBs.
2.3 Using the Command-Line Interface
The command-line interface (CLI) is a text-based way to manage and monitor the system.
You can access the CLI by using a direct serial connection or by using a remote logical
connection with telnet or SSH.
This section describes the CLI syntax, conventions, and modes. It contains the following
topics:
•
Section 2.3.1 “Command Syntax” on page 2-2
•
Section 2.3.2 “Command Conventions” on page 2-3
•
Section 2.3.3 “Unit-Slot-Port Naming Convention” on page 2-5
•
Section 2.3.4 “Using the “No” Form of a Command” on page 2-6
•
Section 2.3.5 “Command Modes” on page 2-6
•
Section 2.3.6 “Entering CLI Commands” on page 2-9
•
Section 2.3.7 “Using CLI Help” on page 2-10
•
Section 2.3.8 “Accessing the CLI” on page 2-11
2.3.1 Command Syntax
A command is one or more words that might be followed by one or more parameters.
Parameters can be required or optional values.
Содержание GSM7224 - Switch
Страница 4: ...v1 0 February 2007 iv...
Страница 20: ...xx v1 0 February 2007...
