NETGEAR GSM7224 - Switch, Справочное руководство CLI

Страница: 31 / 284

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Overview 2-7
v1.0, February 2007
Interface Config
Switch (Interface <unit/slot/
port>)#
Allows you to enable or modify
the operation of an interface and
provides access to the router
interface configuration
commands.
Use this mode to set up a
physical port for a specific logical
connection operation.
Line Config
Switch (line)#
Allows you to configure various
telnet settings and the console
interface.
Policy Map Config
Switch (Config policy-map)#
Allows you to access the QoS
Policy-Map configuration mode
to configure the QoS Policy-Map.
Policy Class Config
Switch (Config policy-class-map)#
Consists of class creation,
deletion, and matching
commands. The class match
commands specify Layer 2,
Layer 3, and general match
criteria.
Class Map Config
Switch (Config class-map)#
Allows you to access the QoS
Class-Map configuration mode to
configure QoS class maps.
Router OSPF
Config
Switch (Config router)#
Allows you to access the router
OSPF configuration commands.
Router RIP Config
Switch (Config router)#
Allows you to access the router
RIP configuration commands.
MAC Access-list
Config
Switch (Config mac-access-list)#
Allows you to create a MAC
Access-List and to enter the
mode containing Mac Access-
List configuration commands.
DHCP Pool Config
Switch (Config dhcp-pool)#
Allows you to access the DHCP
Pool configuration.
Stack Global
Config Mode
Switch (Config stack)#
Allows you to access the Stack
Global Config Mode.
Table 2-5. CLI Command Modes (continued)
Command Mode Prompt Mode Description