NETGEAR GSM7224 - Switch, Справочное руководство CLI

Страница: 222 / 284

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
14-12 Quality of Service (QoS) Commands
v1.0, February 2007
• Any attempts to delete the
<refclassname>
class while the class is still referenced by
any
<class-map-name>
fails.
• The combined match criteria of
<class-map-name>
and
<refclassname>
must be an
allowed combination based on the class type.
• Any subsequent changes to the
<refclassname>
class match criteria must maintain
this validity, or the change attempt fails.
• The total number of class rules formed by the complete reference class chain
(including both predecessor and successor classes) must not exceed a platform-
specific maximum. In some cases, each removal of a refclass rule reduces the
maximum number of available rules in the class definition by one.
14.3.5.1 no match class-map
This command removes from the specified class definition the set of match conditions
defined for another class. The
<refclassname>
is the name of an existing DiffServ class
whose match conditions are being referenced by the specified class definition.
Format
no match class-map <refclassname>
Mode
Class-Map Config
14.3.6 match cos
This command adds to the specified class definition a match condition for the Class of
Service value (the only tag in a single tagged packet or the first or outer 802.1Q tag of a
double VLAN tagged packet). The value may be from 0 to 7.
Default
none
Format
match cos
<0-7>
Mode
Class-Map Config