NETGEAR GSM7224 - Switch, Справочное руководство CLI

Страница: 123 / 284

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
DHCP Commands 7-3
v1.0, February 2007
7.1.2.1 no client-identifier
This command deletes the client identifier.
Format
no client-identifier
Mode
DHCP Pool Config
7.1.3 client-name
This command specifies the name for a DHCP client. Name is a string consisting of
standard ASCII characters.
Default none
Format
client-name <name>
Mode
DHCP Pool Config
7.1.3.1 no client-name
This command removes the client name.
Format
no client-name
Mode DHCP Pool Config
7.1.4 default-router
This command specifies the default router list for a DHCP client. {
address1, address2…
address8
} are valid IP addresses, each made up of four decimal bytes ranging from 0 to
255. IP address 0.0.0.0 is invalid.
Default
none
Format
default-router <address1>
[<address2>....<address8>]
Mode DHCP Pool Config
7.1.4.1 no default-router
This command removes the default router list.
Format
no default-router
Mode
DHCP Pool Config