NETGEAR GSM7224 - Switch, Справочное руководство CLI

Страница: 77 / 284

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Port and System Setup Commands 4-17
v1.0, February 2007
4.4.1 network mac-address
This command sets locally administered MAC addresses. The following rules apply:
• Bit 6 of byte 0 (called the U/L bit) indicates whether the address is universally
administered (b'0') or locally administered (b'1').
• Bit 7 of byte 0 (called the I/G bit) indicates whether the destination address is an
individual address (b'0') or a group address (b'1').
• The second character, of the twelve character macaddr, must be 2, 6, A or E.
A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').
Format
network mac-address
<macaddr>
Mode
Privileged EXEC
4.4.2 network mac-type
This command specifies whether the switch uses the burned in MAC address or the
locally-administered MAC address.
Default burnedin
Format
network mac-type
{ local | burnedin }
Mode
Privileged EXEC
4.4.2.1 no network mac-type
This command resets the value of MAC address to its default.
Format
no network mac-type
Mode Privileged EXE