NETGEAR GSM7224 - Switch, Справочное руководство CLI

Страница: 69 / 284

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Port and System Setup Commands 4-9
v1.0, February 2007
4.1.18 show port status
This command displays the output with current port attributes and operational status.
Format
show port status {<slot/port> | all}
Mode
Privileged Exec
Interface Valid slot and port number separated by forward slashes.
Media Type “Copper” or “Fiber” for combo port.
Physical Mode
Either “Auto” or fixed speed and duplex mode.
Physical Status
The actual speed and duplex mode
Link Status
Whether the link is Up or Down.
Loop Status Whether the port is in loop state or not.
Partner Flow
Control
Whether the remote side is using flow control or not.
4.2 Pre-login Banner and System Prompt Commands
This section describes the commands you use configure the pre-login banner and the
system prompt. The pre-login banner is the text that displays before you login at the
User:
prompt.
4.2.1 copy
The
copy
command includes the option to upload or download the CLI Banner to or from
the switch. You can specify local URLs by using TFTP, Xmodem, Ymodem, or Zmodem.
Default
none
Format
copy
<Code Sample Variable><tftp://<ipaddr>/<filepath>/
<filename>><Code Sample Variable>
nvram:clibanner
copy nvram:clibanner
<Code Sample Variable><tftp://
<ipaddr>/<filepath>/<filename>><Code Sample Variable>
Mode Privileged EXEC
4.2.2 set prompt
This command changes the name of the prompt. The length of name may be up to 64
alphanumeric characters.