NETGEAR GSM7224 - Switch, Справочное руководство CLI

Страница: 102 / 284

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
5-14 Spanning Tree Protocol Commands
v1.0, February 2007
MSTP BPDUs
Received
Multiple Spanning Tree Protocol Bridge Protocol Data Units
received.
5.2.4 show spanning-tree mst port detailed
This command displays the detailed settings and parameters for a specific switch port
within a particular multiple spanning tree instance. The parameter
<mstid>
is a number
that corresponds to the desired existing multiple spanning tree instance. The
<slot/port>
is the desired switch port.
Format
show spanning-tree mst port detailed <mstid>
<slot/port>
Mode Privileged EXEC
User EXEC
MST Instance ID
The ID of the existing MST instance.
Port Identifier
The port identifier for the specified port within the selected
MST instance. It is made up from the port priority and the
interface number of the port.
Port Priority
The priority for a particular port within the selected MST
instance. The port priority is displayed in multiples of 16.
Port Forwarding
State
Current spanning tree state of this port.
Port Role Each enabled MST Bridge Port receives a Port Role for each
spanning tree. The port role is one of the following values:
Root Port, Designated Port, Alternate Port, Backup Port,
Master Port or Disabled Port
Auto-Calculate
Port Path Cost
This indicates whether auto calculation for port path cost is
enabled.
Port Path Cost Configured value of the Internal Port Path Cost parameter.
Auto-Calculate
External Port Path
Cost
This indicates whether auto calculation for external port path
cost is enabled.
External Port Path
Cost
Configured value of the external Port Path Cost parameter.
Designated Root
The Identifier of the designated root for this port.