manualshive.com logo in svg

NETGEAR GSM7224 - Switch, Справочное руководство CLI

Поделиться
Скачать
NETGEAR GSM7224 - Switch Скачать руководство пользователя страница 119

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

VLAN Commands

6-13

v1.0, February 2007

6.2.3 show vlan port

This command displays VLAN port information. 

Format  

show vlan port {<slot/port> | all}

Modes  

Privileged EXEC
User EXEC

Interface  

Valid slot and port number separated by forward slashes. It is 
possible to set the parameters for all ports by using the selec-
tors on the top line. 

Port VLAN ID  

The VLAN ID that this port will assign to untagged frames or 
priority tagged frames received on this port. The value must 
be for an existing VLAN. The factory default is 1. 

Acceptable Frame 
Types  

Specifies the types of frames that may be received on this 
port. The options are 'VLAN only' and 'Admit All'. When set 
to 'VLAN only', untagged frames or priority tagged frames 
received on this port are discarded. When set to 'Admit All', 
untagged frames or priority tagged frames received on this 
port are accepted and assigned the value of the Port VLAN 
ID for this port. With either option, VLAN tagged frames are 
forwarded in accordance to the 802.1Q VLAN specification. 

Ingress Filtering  

May be enabled or disabled. When enabled, the frame is dis-
carded if this port is not a member of the VLAN with which 
this frame is associated. In a tagged frame, the VLAN is iden-
tified by the VLAN ID in the tag. In an untagged frame, the 
VLAN is the Port VLAN ID specified for the port that 
received this frame. When disabled, all frames are forwarded 
in accordance with the 802.1Q VLAN bridge specification. 
The factory default is disabled. 

GVRP  

May 

be enabled or disabled.

Default Priority  

The 802.1p priority assigned to tagged packets arriving on 
the port.

Содержание GSM7224 - Switch





























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды