LAN Configuration
94
NETGEAR ProSAFE VPN Firewall FVS318G v2
•
WAN IP address
. 2000::e246:9aff:fe1d:1a9c with a prefix length of 64
•
DMZ IP address
. 176::e246:9aff:fe1d:a1bc with a prefix length of 64
•
Primary LAN IP address
. FEC0::1 with a prefix length of 10
•
Secondary LAN IP address
. 2001:db8:3000::2192 with a prefix length of 10
To add a secondary LAN IPv6 address:
1.
Log in to the unit:
a.
In the address field of any of the qualified web browsers, enter
https://192.168.1.1
.
The NETGEAR Configuration Manager Login screen displays.
b.
In the
Username
field, enter
admin
and in the
Password / Passcode
field, enter
password
.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c.
Click the
Login
button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2.
Select
Network Configuration > LAN Setup > LAN Multi-homing
.
The LAN Multi-homing screen displays.
3.
In the upper right of the screen, select the
IPv6
radio button.
The Available Secondary LAN IPs table displays the secondary LAN IP addresses added
to the VPN firewall.
4.
In the Add Secondary LAN IP Address section, enter the following settings:
•
IPv6 Address
. Enter the secondary address that you want to assign to the LAN ports.
•
Prefix Length
. Enter the prefix length for the secondary IP address.
5.
Click the
Add
table button.
6.
Repeat
Step 3
and
Step 4
for each secondary IP address that you want to add to the
Available Secondary LAN IPs table.
To edit a secondary LAN IP address:
1.
Log in to the unit:
