background image

88

B

B.   

Notification of Compliance

NETGEAR Wireless Routers, Gateways, APs

Regulatory Compliance Information

Note: This section includes user requirements for operating this product in accordance with National laws for usage 
of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable 
requirements may result in unlawful operation and adverse action against the end-user by the applicable National 
regulatory authority.

Note: This product's firmware limits operation to only the channels allowed in a particular Region or Country.  
Therefore, all options described in this user's guide may not be available in your version of the product.

Europe – EU Declaration of Conformity 

Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the 
European Union (1999/5/EC). This equipment meets the following conformance standards:

EN300 328 (2.4Ghz), EN301 489-17 EN60950-1

For complete DoC, visit the NETGEAR EU Declarations of Conformity website at: 

http://support.netgear.com/app/answers/detail/a_id/11621/

EDOC in Languages of the European Community

Language

Statement

Cesky [Czech]

NETGEAR

 Inc.  tímto prohlašuje, že tento Radiolan je ve shode se základními požadavky 

a dalšími príslušnými ustanoveními smernice 1999/5/ES.

Dansk [Danish]

Undertegnede 

NETGEAR Inc.

 erklærer herved, at følgende udstyr Radiolan overholder de 

væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch 
[German]

Hiermit erklärt 

NETGEAR Inc.

, dass sich das Gerät Radiolan in Übereinstimmung mit den 

grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der 
Richtlinie 1999/5/EG befindet.

Eesti [Estonian]

Käesolevaga kinnitab 

NETGEAR Inc.

 seadme Radiolan vastavust direktiivi 1999/5/EÜ 

põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.

English

Hereby, 

NETGEAR Inc.

, declares that this Radiolan is in compliance with the essential 

requirements and other relevant provisions of Directive 1999/5/EC.

Содержание DGN2200M - Wireless-N 300 Router
































































































Отзывы: