Ness SmartBell, Инструкция по установке и эксплуатации

Страница: 57 / 74

57
Ness SmartBell IP Intercom Installation and Users Manual.(series 2)
Version 1.5.4
The Smartbell 10inch Touch screen is automatically activated when the Outdoor Phone / Door
Station is pressed.
Once activated the following screen is displayed on your room Station or Smartphone.
Please Note: The above screen shot sample may vary depending on what device you are
using. (E.g. Indoor Phone IDP, Android Smartphone or iOS Smartphone)
END : This will end the conversation and close the Active window.
Vol. + : When pressed it will turn the Volume Up if you are having trouble hearing the Visitor.
Vol. - : When pressed it will turn the Volume Down if you are having trouble hearing the Visitor.
Mute : When Mute is Off (Button is Green) visitors will be able to hear you. When ON (Button is Red)
you will be muted and visitors will not be able to hear you.
Door Open : Activates the Outdoor Phone relay / Door lock, and if programmed, it will send a
message to a 3
rd
party device, such as the Ness M1 Security & Automation controller. Before the
output (or message) is activated you will be prompted to confirm you wish to activate the event.
Image Capturing : When activated it will save a snapshot image of the camera view at the Outdoor
phone onto your device.
Door Chime On/Off : Will toggle the Chime function On and Off.
Main Menu : When pressed will close the Door Intercom window and returns to the main menu page.
Once this Door Intercom window is open it provides a talk time of 60 seconds. After this time the
window will close. If you wish to continue the conversation you will need to activate it again.