Ness 114-100 Скачать руководство пользователя страница 111

Страница: 111 / 130

Access Controller

User Manual

102

Steps:

Click

Access Control Alarm Input

tab to enter the following interface.

In the event list on the left, select an alarm / Event input.

Switch the property from

to enable this action.

Host Buzzer

: The audible warning of controller will be triggered.

Card Reader Buzzer

: The audible warning of card reader will be triggered.

Alarm Output

: The alarm output will be triggered for notification.

Access Control Point (Open/Close)

: The door will be open or closed when the event is

triggered.

Note:

The Door cannot be configured as open or closed at the same time. They need to be

different Events. E.g. Event 1 may open / unlock and door and Event 2 may close / lock the
door.

Click

Save

button to save the settings.

Содержание 114-100



































































































































Результаты поиска

Содержание 114-100

Отзывы:

Похожие инструкции для 114-100

Бренды по названию

Популярные бренды

Ness 114-100, Руководство пользователя

Результаты поиска

Содержание 114-100

Отзывы:

Похожие инструкции для 114-100

Бренды по названию

Популярные бренды