Access Controller
·
·
·
·
User Manual
103
7.9.3
Event Card Linkage
Click
Event Card Linkage
tab to enter the following interface.
Notes:
The Event Card Linkage should be supported by the device.
The linkage here refers to the linkage of the iVMS4200 client software’s own actions.
Select the access control device from the list on the left.
Click
Add
button to add a new linkage. You can select the event source as
Event Linkage
or
Card
Linkage
.
Event Linkage
For the event linkage, the alarm event can be divided into four types: device event, alarm input,
door event, and card reader event.
Steps:
1.
Click to select the linkage type as
Event Linkage
, and select the event type from the dropdown
list.
For Device Event, select the detailed event type from the dropdown list.
For Alarm Input, select the type as alarm or alarm recovery and select the alarm input
name from the table.
For Door Event, select the detailed event type and select the source door from the table.
For Card Reader Event, select the detailed event type and select the card reader from the
table.
2.
Set the linkage target, and switch the property from
to
to enable this function.
Host Buzzer:
The audible warning of controller will be enabled/disabled.
Capture:
The real-time capture will be enabled.
Содержание 114-100
Страница 1: ...DS K2600 Series Access Controller User Manual Ness V1 0 ...
Страница 26: ...Access Controller User Manual 17 4 4 Connecting the External Alarm Device 4 5 Door Button Wiring Diagram ...
Страница 29: ...Access Controller User Manual 20 4 9 Fire Alarm Module Wiring ...
Страница 115: ...Access Controller User Manual 106 3 Click Save button to save parameters ...
