Ness 114-100, Руководство пользователя

Страница: 84 / 130

Access Controller
· · · ·
User Manual
75
2. You can editing the following parameters:
Door Magnetic : (reed switch for monitoring the state (open/close) of the door. When using
door monitoring with a N/C Reed Switch, then select ‘ Remain Closed’. If not monitoring the
state of the door with a N/C Reed switch then have it set to “
Remain Open
” (Normally Open
condition).
Exit Button Type : Sets the “Request to Exit Button Type” : If the exit button has a Normally
Open contact then set this to “ Remain Open ” and if it uses a Normally Closed contact then set
this to “
Remain Close”.
Door Locked Time
: This is the time the door lock Output will stay activated for (Door unlocked
for) after a valid Card read.
Door Open Duration by Card for Disabled Person:
This is the time the door lock Output will
stay activated for (Door unlocked for) after a valid Card read by a user assigned as disabled.
Door Open Timeout Alarm : The alarm can be triggered if the door has not been closed (i.e.
Door open too long). The time set here sets how long the door can remain opened for after a
valid card read, or Request to Exit button activation before the door open timeout alarm will
activate.
Enable Locking Door when Door Closed : The door can be locked once it is closed even if the
Door Locked Time is not reached.
Duress Code : The door can open by inputting the duress code when there is duress. At the
same time, the client software can receive the duress event.
Super Password: The specific person can open the door by inputting the super password.
Dismiss Code: Input the dismiss code to stop the buzzer of the card reader.