Ness 114-100, Руководство пользователя

Страница: 98 / 130

Access Controller
· · · ·
User Manual
89
Example. User arrives in the morning and presents his valid card at the door reader. The door them
remains unlocked for the time programmed in the ‘Remain Open Duration (Mins)’ time. (e.g. 8
hours). At the expiry of this time (or if a card in the ‘First Card List’ is used again) the door will
relock.
Notes:
•
The Remain Open Duration should be between 0 and 1440 minutes. By default, it is 10
minutes.
•
In the First Card Authorization mode, you can access the door when swiping a ‘super card’, a
duress card or input the duress code without swiping the first card.
•
You can swipe the first card again to disable the first card mode.
•
The first card authorization is effective only on the current day. The authorization will be
expired at midnight.
7.7.5 Anti-Passing Back
Purpose:
You can set anti-passing back for card readers in the same access controller.
Anti-Passback prevents a card from “being passed back” for the same card to be used again at the
same reader until it has been used a reader programmed for exiting the area. (e.g. Prevent a card
from being used at a car park Entry Reader and then pass the card back to another person to allow
them access. The card will be denied access when tried to be used a second time until it is used at
an exit reader)
Notes:
Either the anti-passing back or multi-door interlocking function can be configured for an
access control device at the same time.
You should enable the anti-passing back function on the access control device first.
Setting the Path of Swiping Card (Card Reader Order)
Steps:
1. Click Anti-passing Back tab to enter the following interface.