Ness 114-100, Руководство пользователя

Страница: 104 / 130

Access Controller
· · · ·
User Manual
95
Steps:
1. Click Authentication Password tab and select an access control device from the list.
Once the controller is selected, all the cards and persons which have been applied to the device
will be displayed.
Note:
•
It is important to click on the controller each time you enter the “Authentication Password”
field to refresh the list of card applied to that controller.
•
For setting and applying the permissions to the device, refer to Chapter 7.6 Permission
Configuration.
2. Click the
Password
field of the card and input the authentication password for the card.
Note: The authentication password should contain 4 to 8 digits.
3. After setting the authentication password, the authentication password function of the card
will be enabled.
4. (Optional) You can input the keywords of card No., person name, or authentication password to
search from the Filter Flield in the top right of the screen.
Notes:
•
Up to 500 cards with authentication password can be added to one access control device.
•
The password should be unique and cannot be the same with super password, duress code,
and dismiss code in the access control parameters.
7.7.9 Custom Wiegand
Do not attempt to touch these settings unless you have a clear understanding of 3
rd
party
integration.
Purpose:
Based on the knowledge of uploading rule for the third party wiegand, you can set multiple
customized wiegand protocols to communicate between the controller and the third party card
readers.